Sep 27, 2023


You have successfully submitted your enquiry. Someone from our company will respond ASAP

Since 1974, STEJASA has been a leading supplier of dampers and complete bypass systems that are able to operate in the worst working conditions in the power technology industry.

Since 1974, STEJASA has been a leading supplier of dampers and complete bypass systems that are able to operate in the worst working conditions in the power technology industry.

STEJASA designs and supplies exhaust gas systems for gas turbine installations. Our gas systems are designed according to GT and plant characteristics in simple cycle or combined cycle mode.

Advantages of our bypass systems include:

Our exhaust gas systems generally include the following:

Additionally, STEJASA designs special configurations with stack, directly supported by the bypass damper, therefore eliminating the need for a supporting stack structure and reducing civil works and the erection period.

We design and manufacture diverter dampers, and benefits of our single blade dampers include:

For 100% sealing efficiency, we fit either a double-seal row or ‘v’-shaped seal. The cavity formed by the seals and the landing bars is pressurised by a small fan in order to provide an effective air barrier and zero cross-blade leakage.

The entire actuator system of a diverter damper is externally mounted and can be inspected and maintained while the main plant is running.

The sizing of the actuator is one of the most critical tasks in the design of a diverter. For both the direct shaft and toggle system drive, the following parameters must be considered:

We design and supply a range of butterflies and multi-louvres for all applications in the power technology industry. STEJASA can design butterflies and multi-louvres for external insulation or supply them with internal insulation.

STEJASA’s butterfly and multi-louvre dampers are designed with metal-metal or elastic seal systems, depending on the required tightness. The damper construction is reinforced to withstand all the static and dynamic stresses inherent to the damper.

Our blade design allows a very low-pressure drop and an efficient flow control, and all accessories and drives are mounted on the casing

Our butterfly dampers are single bladed and are used to control and / or isolate gas flow. STEJASA’s multi-louvre dampers are equivalent to butterfly dampers but have two or more blades.

For 100% tightness efficiency, tandem dampers with air sealing are also available.

Generally used in gas turbine installations, our STB blanking plates allow safe access to HRSG. In normal operation, the blanking plate is hanging from a supporting structure. The plate is inserted by unbolting the flange at the expansion joint, which is then compressed to allow the plate to be inserted.

STEJASA’s STR repair guillotines include a frame and a blade with its support. The frame is provided with a removable cover that remains closed when the plate is in or out of the gas stream. In cases where high tightness is required, the blade is supplied with seals all around its perimeter. For large-sized guillotines, a self-locking system is standard. Blade actuation can be done using a manual or electric drive.

Our STS guillotines are used in process industries and are fully automated, therefore controlled by the plant SCADA. The gullotine bonnet ensures that there is no leakage from the damper to the atmosphere under any conditions, and the blade is reinforced to minimise deflexion and stresses.

STEJASA are now supplying standard t -shaped 3-way dampers available for quick delivery for all applications that require a shut-off of up to 99%.

Stejasa was established in 1974 in Madrid, Spain, and has almost 40 years experience operating in the Power Industry. The company has supplied dampers to over 50 countries, with clients, branches, licensees and agents wordwide.

STEJASA's reputation for dampers designs is well known worldwide. These have been present in the process industries for decades and have proven to be extremely reliable.

STEJASA has announced that it will participate at POWER-GEN Europe this year.

STEJASA has successfully delivered six 'single-piece' diverter dampers and guillotines.

STEJASA has been awarded four gas turbine exhaust systems by DURO FEGUERA as part of SPE’s six combined-cycle power plant expansion.

This cogeneration plant is installed inside the Artenius factory, in Sines, Portugal, who produces purified terephtalic acid. It has been conceived to supply high-pressure steam and electricity to its neighboring PTA plant, which is one of the largest of its kind.